The pressure roller continuously squeezes the biomass material into the ring mold hole to achieve the purpose of particle molding. The pressure roller keeps moving and friction during the work. Therefore, the operating temperature of the pressure roller is very high. It is necessary to supply oil and heat in a timely and reasonable manner to effectively extend the service life of the pressure roller, increase the service life of the pressure roller, and increase the working output. The maintenance of the biomass pellet mill ring die needs to be cleaned once with gasoline or diesel oil for 30 days, and at the same time, the grease is injected. During work, it is necessary to ensure that there are no hard materials such as stones and iron scraps in the raw material, so as to avoid damage to the biomass pellet machine ring mold. . In winter, the biomass pelletizer and ring mold must be preheated prior to processing. Because the weather is cold and the stability is poor, the warm-up time should be lengthened accordingly. After the ring mold temperature rises, it can be fed; it can also be used for preheat grinding, which is beneficial to the biomass pellet machine. Increase production.
Further information about wooden pellet machine pls contact to us.