Please pay attention to the recent export roller shell

Please note that the recent export of drum casings: Due to our company's excellent business, our technological innovation and rich experience have led to a continuous increase in user reviews, which fully proves the product quality of "mutual cooperation and innovation" in China and significantly improves service efficiency.

The small particle machine used can be divided into ring mold and flat mold, so which one is better? Today we will make a comparison. The characteristics of a more vertical ring mold granulator: The raw materials specifically designed for the ring mold granulator include straw, straw, rice husk, sawdust, sawdust, bark, etc.

The ring mold granulator is a Pellet fuel forming machine that uses agricultural and forestry processing wastes such as wood chips, straw, rice husks, bark and other biomass as raw materials. These raw materials usually include oak chips, sawdust, wood bran and other high content raw materials. Usually, the density of the materials is unstable due to the unstable density of the materials. Of course, with the rise of the aquaculture industry, dregs are also specially designed for feed mills and biomass pellet machines.

When starting the mixer of the particle machine, the feeding amount should be adjusted, and the particle length should be different. Corresponding materials should be used together. For the same material, it should always be mixed with each other to avoid cracking of the ring mold.

After using the ring mold for a period of time, check if the feeding is uniform. If any deformation is found in the reverse concave pit of the ring mold, it should be repaired in a timely manner to facilitate the processing of the ring mold.

The ring mold must be stored in a dry and clean place, and it should be noted that the water supply can only be purchased every 2 days. The initial operation of the ring mold particle machine is not always smooth, and the initial operation of the ring mold particle machine must be maintained in good working condition, so that it must be cleaned every 4 hours.

The working principle of the ring mold granulator: 1. The ring mold of the granulator must be stored in a dry and clean place. If stored in a damp place, it must be dried or screened to obtain the best particles. 2. The ring mold of the particle machine (should be fixed in a dry and clean place), if used improperly. It should be put into operation to achieve good shock absorption and reduce the working time of the particle machine, in order to carry out quality improvement. 3. The ring mold life of a particle machine is usually made by combining processing workshops, chemical, food industries, and other chemical power plants, and can also be processed through materials.

The depth of the mold hole also has a significant impact on the quality and output of granulation, and the mold hole also has an impact on the quality of granulation. However, if the mold hole is operated for a long time, cracks will appear in the mold hole. This phenomenon usually attracts the attention of the granulator to a large extent. The reason for this phenomenon is that the internal temperature of the granulator can be adjusted. The temperature of the ring mold is beneficial to the properties of the granulator, which means that if it is operated in an oily manner, Due to the unchanged gap between the pressure roller and the ring mold, the particle machine cannot enter the ring mold normally, resulting in stress on the working surface of the particle machine ring mold and causing the particle machine ring mold to bounce during movement. The wear and tear between the particle machine ring mold and the pressure roller is also caused.